Page 1 of 1

Startup.wav is low-pitched when using a different sound

Posted: Fri May 07, 2021 10:24 pm
by CorporalPig22
So I've been playing around with the latest SheepShaver build after getting it to work. I've been experimenting with using different startup sounds from different Macs. So for a 7.5.3 emulation, I decided to use the Power Mac 9500 sound for startup.wav, but when I started up the emulation, the sound was much lower-pitched than what I had actually used. Am I doing something wrong, and what do I do to fix it?

Re: Startup.wav is low-pitched when using a different sound

Posted: Sat May 08, 2021 10:03 am
by Ronald P. Regensburg
What do you mean? Is the sound different when the .wav file is started directly on the host or when used as "startup.wav" file in the same folder as SheepShaver in order to play at SheepShaver startup?

Re: Startup.wav is low-pitched when using a different sound

Posted: Sat May 08, 2021 5:37 pm
by CorporalPig22
I meant the startup.wav in the main SheepShaver directory.

Re: Startup.wav is low-pitched when using a different sound

Posted: Sat May 08, 2021 6:19 pm
by adespoton
What he asked was: does the sound sound differently when you play it manually vs when you run SheepShaver.

Re: Startup.wav is low-pitched when using a different sound

Posted: Mon May 10, 2021 1:04 am
by CorporalPig22
It sounds normal when I play it manually, but when I use it in SheepShaver, that's when it gets all low-pitched.

Re: Startup.wav is low-pitched when using a different sound

Posted: Mon May 10, 2021 7:08 am
by Ronald P. Regensburg
Weird. On my Mac the sound plays exactly the same in both cases.

Are you running SheepShaver in Windows?

Re: Startup.wav is low-pitched when using a different sound

Posted: Mon May 10, 2021 8:04 pm
by CorporalPig22
Yes. I'm using SheepShaver on Windows 10.

Re: Startup.wav is low-pitched when using a different sound

Posted: Tue May 11, 2021 7:15 am
by Ronald P. Regensburg
Well, then do others using a startup.wav with SheepShaver in Windows have the same experience?

Re: Startup.wav is low-pitched when using a different sound

Posted: Tue May 11, 2021 4:47 pm
by CorporalPig22
Not that I know of. So far, I've really been the only one to experience this.

Re: Startup.wav is low-pitched when using a different sound

Posted: Tue May 11, 2021 5:01 pm
by adespoton
Somehow the audio is going through a different pipeline for you. Do you have any audio filters installed? Using a custom sound card? Routing application audio through a different system than system alerts? anything else about your hardware or software config that might be affecting this?

Re: Startup.wav is low-pitched when using a different sound

Posted: Fri May 14, 2021 3:46 pm
by CorporalPig22
I don't have any of those.

Re: Startup.wav is low-pitched when using a different sound

Posted: Fri May 14, 2021 3:57 pm
by Ronald P. Regensburg
Ronald P. Regensburg wrote: Tue May 11, 2021 7:15 am Well, then do others using a startup.wav with SheepShaver in Windows have the same experience?
I meant for other users who use SheepShaver on Windows and use a startup.wav file to respond.

Re: Startup.wav is low-pitched when using a different sound

Posted: Sun May 16, 2021 2:57 am
by CorporalPig22
Ronald P. Regensburg wrote: Fri May 14, 2021 3:57 pm
Ronald P. Regensburg wrote: Tue May 11, 2021 7:15 am Well, then do others using a startup.wav with SheepShaver in Windows have the same experience?
I meant for other users who use SheepShaver on Windows and use a startup.wav file to respond.
Ok then. We can just wait and see if anyone else with the same issue responds.

Re: Startup.wav is low-pitched when using a different sound

Posted: Sun May 16, 2021 5:51 am
by kanjitalk755

Re: Startup.wav is low-pitched when using a different sound

Posted: Sun May 16, 2021 6:10 am
by Cat_7
Thanks for the fix.

I never experienced the issue mentioned above.

Best,
Cat_7

Re: Startup.wav is low-pitched when using a different sound

Posted: Sun May 16, 2021 5:48 pm
by CorporalPig22
kanjitalk755 wrote: Sun May 16, 2021 5:51 am Fixed.

https://github.com/kanjitalk755/macemu
Is there a Windows version by any chance? I only see Mac and Linux versions.

Re: Startup.wav is low-pitched when using a different sound

Posted: Sun May 16, 2021 5:50 pm
by Cat_7
Huh? Did you check the SheepShaver and Basilisk for Windows fora?

viewtopic.php?f=20&t=5325
viewtopic.php?f=6&t=5282

Best,
Cat_7

Re: Startup.wav is low-pitched when using a different sound

Posted: Mon May 17, 2021 7:49 pm
by CorporalPig22
Cat_7 wrote: Sun May 16, 2021 5:50 pm Huh? Did you check the SheepShaver and Basilisk for Windows fora?

viewtopic.php?f=20&t=5325
viewtopic.php?f=6&t=5282

Best,
Cat_7
I did, and I found the build with the fix.