Network messages

[Ph0eniX]

Are these normal when you start PearPC with the net enabled?

creating 3com 3c90x NIC emulation with eth_addr = 00:04:75:86:23:f6
[IO/3c90x] indicate(00000010) mIntStatus now = 00000000
[IO/3c90x] acknowledge(00000010) mIntStatus now = 00000000
[IO/3c90x] EnetIf: 90 bytes read (not passing the filter)!!
[IO/3c90x] Not uploading, because: mUpStalled(=0) or UpListPtr == 0 (=00000000) or not mRxPacketSize(=0)
[CPU/MMU] new pagetable: sdr1 = 0x00300003
[CPU/MMU] new pagetable: sdr1 accepted
[CPU/MMU] number of pages: 2^15 pagetable_start: 0x00300000 size: 2^18
[IO/3c90x] indicate(00000010) mIntStatus now = 00000000
[IO/3c90x] acknowledge(00000010) mIntStatus now = 00000000
[IO/3c90x] EnetIf: 78 bytes read (not passing the filter)!!
[IO/3c90x] Not uploading, because: mUpStalled(=0) or UpListPtr == 0 (=00000000) or not mRxPacketSize(=0)
[IO/3c90x] indicate(00000010) mIntStatus now = 00000000
[IO/3c90x] acknowledge(00000010) mIntStatus now = 00000000
[IO/3c90x] EnetIf: 70 bytes read (not passing the filter)!!
[IO/3c90x] Not uploading, because: mUpStalled(=0) or UpListPtr == 0 (=00000000) or not mRxPacketSize(=0)
[IO/3c90x] indicate(00000010) mIntStatus now = 00000000
[IO/3c90x] acknowledge(00000010) mIntStatus now = 00000000
[IO/3c90x] EnetIf: 70 bytes read (not passing the filter)!!
[IO/3c90x] Not uploading, because: mUpStalled(=0) or UpListPtr == 0 (=00000000) or not mRxPacketSize(=0)
[IO/3c90x] indicate(00000010) mIntStatus now = 00000000
[IO/3c90x] acknowledge(00000010) mIntStatus now = 00000000
[IO/3c90x] EnetIf: 70 bytes read (not passing the filter)!!
[IO/3c90x] Not uploading, because: mUpStalled(=0) or UpListPtr == 0 (=00000000) or not mRxPacketSize(=0)
[CPU/CPU] execution started at 01c00cb0