I've already dl the 3gb file, and pearpc for amdxp....
and I've also installed Darwin in the "HDD" and it can boot to it...
and now I am mounting the OSx 10.3.iso in to slave and select to boot on it
But it hangs in the Boot Screen... even can't get into the install menu... for 3+hours....
is it really hangs or just loading?!
here's my config file..:
## PearPC Configuration File
##
## Resolution
##
## 0: 640x480x8 (indexed)
## 1: 640x480x15
## 2: 640x480x32
## 3: 800x600x8 (indexed)
## 4: 800x600x15
## 5: 800x600x32
## 6: 1024x768x8 (indexed)
## 7: 1024x768x15
## 8: 1024x768x32
##
## The indexed modes are unsupported.
##
## default: 4
ppc_start_resolution = 4
##
## Redraw interval (in ms)
## must be between 1 and 999
##
## If you set this higher, PearPC will spend less time doing redraws (and so run faster)
## but feel less responsive. You should adjust this to your computer speed and personal
## preference.
##
redraw_interval_msec = 50
##
## Loader
##
##
## Boot method
## this can be
## 1. "auto", prom will boot the first bootable partition found (default)
## 2. "select", prom will show you a list of bootable partitions
## 3. "force", prom will load and boot the local file prom_loadfile
##
prom_bootmethod = "select"
## Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"
##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup
##
#prom_env_bootargs = ""
prom_env_machargs = "-v"
##
## This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"
## This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600
##
## CPU Config
##
## Processor Version Register
## Defaults to 0x00088302
## Only change if you know want you are doing
##
#cpu_pvr = 0x00088302
##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##
#memory_size=0x8000000
##
## IO Devices
##
##
## PCI IDE Config
##
## Drive type will be set according to file extension:
## .img: Harddisk (filesize must be multiple of 516096)
## .iso: CD-Rom
## Or you can override this by specifying the type via
## pci_ide0_master_type / pci_ide0_slave_type
pci_ide0_master_installed = 1
pci_ide0_master_image = "PantherImage.img"
#pci_ide0_master_type = "hd"
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "Mac.OSX.V10.3.Phanter.Disc1.ISO"
pci_ide0_slave_type = "cdrom"
##
## Network
##
## Choose one of the cards
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"
pci_rtl8139_installed = 0
pci_rtl8139_mac = "de:ad:ca:fe:12:35"
##
## USB
##
pci_usb_installed = 1
##
## NVRAM
##
nvram_file = "nvram"
and a screen shot
