Posted: Mon Feb 07, 2005 4:14 pm
Hello,
the bytes not passing the filter look to me to be sign of a routing problem.
If you have access to w2003 server then you could use "routing and remote access" to configure windows routing. It works for me all the time.
First give the tap device a ip address in the normally not routed ranges like 10.10.10.1 or 192.168.0.1
Then use the routing and remote access wizard and select your normal nic to allow others to have internet access, and then choose the tap device as allowed device.
Last give OS X an ip-address like 10.10.10.2 or 192.168.0.2 depending on which address you gave the tap device.
Set default gateway to the tap ip-address and dns' to your normal dns' from the normal nick.
One other remark: networking with 10.2 and 3com is not as "mature" as in 10.3 with the realtek device
Best wishes
Cat_7
the bytes not passing the filter look to me to be sign of a routing problem.
If you have access to w2003 server then you could use "routing and remote access" to configure windows routing. It works for me all the time.
First give the tap device a ip address in the normally not routed ranges like 10.10.10.1 or 192.168.0.1
Then use the routing and remote access wizard and select your normal nic to allow others to have internet access, and then choose the tap device as allowed device.
Last give OS X an ip-address like 10.10.10.2 or 192.168.0.2 depending on which address you gave the tap device.
Set default gateway to the tap ip-address and dns' to your normal dns' from the normal nick.
One other remark: networking with 10.2 and 3com is not as "mature" as in 10.3 with the realtek device
Best wishes
Cat_7