My problem: I'm struggling with pearpc 0.3.1 to install MacOS panther, i have a formatted 6GB image and a 3GB onei created with pearpc control panel.
heres my conf file:
____________________________________
## PearPC Configuration File
##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
## so this would be used only for starting up)
##
## format: "(width)x(height)x(depth)"
## or "(width)x(height)x(depth)@(frequency)"
##
## depth can only be 15 or 32
##
## default: "800x600x15"
##
ppc_start_resolution = "800x600x32"
##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws (and so run faster)
## but feel less responsive. You should adjust this to your computer speed and personal
## preference.
##
redraw_interval_msec = 50
##
## Key codes
##
key_toggle_mouse_grab = "F12"
key_toggle_full_screen = "Alt+Return"
##
## Loader
##
##
## Boot method
## this can be
## 1. "auto", prom will boot the first bootable partition found (default)
## 2. "select", prom will show you a list of bootable partitions
## 3. "force", prom will load and boot the local file prom_loadfile
##
prom_bootmethod = "select"
## Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"
##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup
##
#prom_env_bootargs = ""
#prom_env_machargs = "-v"
##
## This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"
## This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600
##
## CPU Config
##
## Processor Version Register
## Defaults to 0x00088302
## Only change if you know want you are doing
##
#cpu_pvr = 0x00088302
##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##
#memory_size=0x8000000
##
## IO Devices
##
##
## PCI IDE Config
##
## Drive type will be set according to file extension:
## .img: Harddisk (filesize must be multiple of 516096)
## .iso: CD-Rom
## Or you can override this by specifying the type via
## pci_ide0_master_type / pci_ide0_slave_type
pci_ide0_master_installed = 1
pci_ide0_master_image = "D:\pearpc\hd60GB.img"
#pci_ide0_master_type = "hd"
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "e:\Panther.iso"
pci_ide0_slave_type = "cdrom"
##
## Network
##
## Choose one of the cards
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"
pci_rtl8139_installed = 0
pci_rtl8139_mac = "de:ad:ca:fe:12:34"
##
## USB
##
pci_usb_installed = 1
##
## NVRAM
##
nvram_file = "nvram"
__________________________________
after i start Pearpc and select the partition, i see the installer loading, adter 5 seconds i get a big message with: You need to restart your computer...
has this todo with my AMD64 processor?? i have selected G3 as CPU.
