Hello all.
Using Darwin is the only way to partition the HD image ?
I have downloaded "darwin-701.iso" from OpenDarwin but a "Panic" message appeared when I tried to boot it.
I can boot normally with a Panther ISO, but I can't choose a place to install (no partitions).
What can I do ? Which DARWIN to use, and where do get it ?
regards.
Partitioning hd IMAGE - Darwin or not to Darwin!
Moderators: Cat_7, Ronald P. Regensburg
-
- Student Driver
- Posts: 22
- Joined: Tue Mar 23, 2004 1:06 pm
- Location: Brazil
Partitioning hd IMAGE - Darwin or not to Darwin!
Athlon XP 2000+ TBredA @ 1666 FSB 333mhz - Dual DDR 333 Kingston + Radeon 9600 + Epox 8rda+
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
no it's not
If you use just the 3 gb image from the pear site, you can then use OS X to partition and format the image.
In the installer go to disk utility, select the drive and choose erase. The result is a clean hard disk with only one partition, but good for installing OSX (don't install os9 drivers on it.)
Best,
Cat_7
In the installer go to disk utility, select the drive and choose erase. The result is a clean hard disk with only one partition, but good for installing OSX (don't install os9 drivers on it.)
Best,
Cat_7
-
- Student Driver
- Posts: 22
- Joined: Tue Mar 23, 2004 1:06 pm
- Location: Brazil
Thanks Cat. I did the disk erase, but OS X installation keeps me saying that I cant select the partition because is not bootable. Should i do something else ?
regards.
regards.
Athlon XP 2000+ TBredA @ 1666 FSB 333mhz - Dual DDR 333 Kingston + Radeon 9600 + Epox 8rda+
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22
Windows XP Professional
Gentoo 2004.0 - Kernel 2.6.3
][
SGI Indigo 2 High Impact R10k 195mhz 256mb
Irix 6.5.22