E-Maculation
https://emaculation.com/forum/

I need help compiling Mini Vmac 36.04
https://emaculation.com/forum/viewtopic.php?f=7&t=10059
Page 1 of 1

Author:  macplus [ Sun Feb 10, 2019 10:25 pm ]
Post subject:  I need help compiling Mini Vmac 36.04

The title says all. The thing is, I am using Visual C++ 2008 Express Edition, I set the options in the configuration file and everything to generate the tool executable (using the command utility BTW) and it generates two things after I compile: the exe of the config tool and an object file. So, I try running the exe with a t command, it just bomards me with a wall of text, but it doesn't generate any project file nor does it generate any makefile file, which I need to have to build the darn thing in the first place. What am I supposed to do next? I am lost!

Author:  adespoton [ Mon Feb 11, 2019 6:49 pm ]
Post subject:  Re: I need help compiling Mini Vmac 36.04

You're going to want to start here:
https://www.gryphel.com/c/minivmac/build.html
Notably, there's useful information here: https://www.gryphel.com/c/minivmac/setupcfg.html

To use the compiler like you're wanting to, you'll need to set Use Command Line appropriately.

By default, it'll just create a visual studio project that you should be able to load and run. Alternatively, you can build it inside MinGW. If you want a makefile, the Use Command Line flag must be set.

Author:  macplus [ Fri Feb 15, 2019 4:05 am ]
Post subject:  Re: I need help compiling Mini Vmac 36.04

Well, saw your comment, and I tried all sorts of things, like putting all the files of the setup folder in an individual project and then build, putting all the files of the folder in an project (respecting the original hierarchy ofc) but I always either get an exe that I have to run on the command line (which just gives me in return a wall of text) or the building fails. I am going insane with this! If you could give me a helping hand, I would really appreciate it.

Author:  adespoton [ Fri Feb 15, 2019 4:31 am ]
Post subject:  Re: I need help compiling Mini Vmac 36.04

It would probably work better for someone with access to a similar environment to yours to give you a hand; my default build environment is on OS X.

Author:  24bit [ Fri Feb 15, 2019 12:22 pm ]
Post subject:  Re: I need help compiling Mini Vmac 36.04

Couldn´t you just use the old build procedure for 3.58?
If you don´t need a cutting edge build, you might look here (3. DL): http://macintoshgarden.org/apps/mac-sys ... c-mac-plus

Author:  kanjitalk755 [ Sat Feb 16, 2019 6:28 am ]
Post subject:  Re: I need help compiling Mini Vmac 36.04

macplus wrote:
(which just gives me in return a wall of text)

It's a bash script.
To build Mini vMac 36.04, it seems to need bash.

How to build using VC++2008 (without linux like environment)

1) append following lines to setup\CONFIGUR.i
Code:
#define cur_ide gbk_ide_msv
#define ide_vers 9000
#define UseCmndLine 1

2) generate setup.sh (VS command prompt)
Code:
cl setup\tool.c
tool -t wx86 >setup.sh

3) generate makefile using online bash

e.g. https://repl.it/languages/bash

Paste contents of setup.sh, execute and download makefile.

4) make (VS command prompt)
Code:
nmake

minivmac.exe will be generated.

Author:  macplus [ Sat Feb 16, 2019 6:37 am ]
Post subject:  Re: I need help compiling Mini Vmac 36.04

Thanks a lot for your help! I will try it out later (as it is 3 AM and I REALLY want to sleep) and tell you the results.
Update: It worked! I decided to skip the makefile thing and I went with the project file. After building it gave me a nice little exe ready to run!

Author:  krum110487 [ Tue Aug 06, 2019 5:38 am ]
Post subject:  Re: I need help compiling Mini Vmac 36.04

Since this took me a lot longer than I expected as I haven't programmed in C++ in so very long, and less so in Visual Studios.

I had version 2010 installed and I was targeting that version in my config.

the dang thing was not finding "nmake" from the command line option in VS2010, which seems to be an issue with what I had installed.

this command opens what I needed:
Code:
"C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat" x86_amd64


or if you are targeting 32 bit:
Code:
"C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat" x86


After opening this, I could run nmake and everything was happy!

I am posting this for anyone else who spent the better part of 5 hours trying to get nmake to work, I am unsure if this is an issue with VS2019 or not...part of it was a dumb mistake on my end.

Either way, your post was so handy!

Edit (adding my build method):
I also improved upon the process listed above, I downloaded win-bash (a portable bash) and put it in the folder where my source is.

my folder structure looks like this:
Code:
extras/
setup/
shell32/
src/
buildTool.bat
COPYING.txt
README.txt


shell32 has the portable bash extracted to it, then I made the batch file to clean up and re-build minivmac with the script:
Code:
@echo off

REM Delete old build script, minivmac, makefile, bld folder and cfg folder
IF EXIST build.sh DEL /F build.sh
IF EXIST tool.exe DEL /F tool.exe
IF EXIST MAKEFILE DEL /F MAKEFILE
IF EXIST minivmac.exe DEL /F minivmac.exe
IF EXIST .\bld rmdir .\bld /q /s
IF EXIST .\cfg rmdir .\cfg /q /s

REM Create tool.exe remove obj after compilation.
cl setup\tool.c
IF EXIST tool.obj DEL /F tool.obj

REM Generate build bash script using the flags you want to build with
set flags=%1
set flags=%flags:"=%
tool.exe %flags% >> build.sh

REM Use win-bash to run the script
shell32\bash.exe -c ./build.sh

REM run makefile
nmake


to kick of the process you simply open the command line of visual studios like above, then navigate to the project folder and run the following:
Code:
buildTool "-t wx64"


you can put all of your flags in there and it will pass it to the tool it builds as part of the process.

Thanks!

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/