How to set up Appletalk in Sheepshaver Windows?
Moderators: Cat_7, Ronald P. Regensburg, ClockWise
How to set up Appletalk in Sheepshaver Windows?
I recently hanging out at BBSes and tried to download roms from classicmac.ddns.net which needed Appletalk and i dont know how to configure it
Re: How to set up Appletalk in Sheepshaver Windows?
Please read our guide here: https://www.emaculation.com/doku.php/sh ... networking
From OpenVPN install only a tap device and then see under Tap networking and bridging in the guide.
Best,
Cat_7
From OpenVPN install only a tap device and then see under Tap networking and bridging in the guide.
Best,
Cat_7
Re: How to set up Appletalk in Sheepshaver Windows?
How to download openvpn?Cat_7 wrote: ↑Wed May 04, 2022 5:44 am Please read our guide here: https://www.emaculation.com/doku.php/sh ... networking
From OpenVPN install only a tap device and then see under Tap networking and bridging in the guide.
Best,
Cat_7
Re: How to set up Appletalk in Sheepshaver Windows?
OK
how to activate the tap device
Re: How to set up Appletalk in Sheepshaver Windows?
When installed and bridged with your default network connection, you can select the tap device in the SheepShaverGUI in the Network tab at Ethernet Interface. The device will get activated as soon as you start SheepShaver.
Next, make sure to set the TCP/IP control panel in Mac OS to receive an address through DHCP.
Best,
Cat_7
Next, make sure to set the TCP/IP control panel in Mac OS to receive an address through DHCP.
Best,
Cat_7
Re: How to set up Appletalk in Sheepshaver Windows?
There is no tap device on sheepshaver GUICat_7 wrote: ↑Wed May 04, 2022 9:51 am When installed and bridged with your default network connection, you can select the tap device in the SheepShaverGUI in the Network tab at Ethernet Interface. The device will get activated as soon as you start SheepShaver.
Next, make sure to set the TCP/IP control panel in Mac OS to receive an address through DHCP.
Best,
Cat_7
Re: How to set up Appletalk in Sheepshaver Windows?
That is a quite sparse answer, not much to go on.
Can you upload some screen shots somewhere of your Windows network connections and the SheepShaverGUI while opening the ethernet interface selection list?
Then link to the screen shots here.
And also copy your sheepshaver_prefs file in your answer?
Best,
Cat_7
Can you upload some screen shots somewhere of your Windows network connections and the SheepShaverGUI while opening the ethernet interface selection list?
Then link to the screen shots here.
And also copy your sheepshaver_prefs file in your answer?
Best,
Cat_7